SENECA S.R.L.

Batch controller in EExd flame retardant case with advanced functions, 24 Vac/dc

4-digit indicator, universal input, re-transmitted output, power supply 24 Vac/dc, 4 open collector alarms, RS232/RS485

4-digit indicator, universal input, re-transmitted output, power supply 24 Vac/dc, 3 SPDT alarms, RS232/RS485

Type 2 230 Vac Surge Protection at 3 conductors (L, N, PE)

Threee-phase power meter kit including nr.1 S604E RS485 Modbus,1MB mem. Log + nr. 3 Rogowski coils RC150 L= 30cm Øint. 9,5 cm

Threee-phase power meter kit including nr.1 S604B RS485 Modbus,1MB mem. Log + nr. 3 Rogowski coils RC150 L= 45cm Øint. 14 cm

Threee-phase power meter kit including nr.1 S604E RS485 Modbus,1MB mem. Log+ nr. 3 Rogowski coils RC150 L= 70cm Øint. 22 cm

Threee-phase power meter kit including nr.1 S604E Ethernet,1MB mem. Log + nr. 3 Rogowski coils RC150 L= 30cm Øint. 9,5 cm

Threee-phase power meter kit including nr.1 S604E Ethernet,1MB mem. Log + nr. 3 Rogowski coils RC150 L= 45cm Øint. 14 cm

Threee-phase power meter kit including nr.1 S604B Ethernet,1MB mem. Log+ nr. 3 Rogowski coils RC150 L= 70cm Øint. 22 cm

LCD 96x96 Energy PLUS Power Meter,  TA1/5A-RS485 Modbus,8MB log.,1 DI 2 DO, harmonics

Three-phase energy power meter model S711E with 8MB memory. THD & harmonics measures. Voltage measurement up to 600Vac and 5A input for current. Backlighted LCD. 1 DI, 2 DO and 1 Ethernet port with Modbus TCP. Power supply requirement 85~265Vac / 110Vdc

LCD 96x96 Energy PLUS Power Meter Kit , Ethernet,8MB log.,1 DI 2 DO, harmonics, 3 Rogowski RC150 L= 45 cm Øint. 14cm

Passive current transformer 100 adc closed core, configuration with DIP switch, input from 0 to 100A (Monopolar) and -10 to 100A (Bipolar). Output from 4 to 20mA, power 6 to 100V. Includes 2 x A-DIN-T201 for DIN rail mounting

AC/DC contactless TRMS direct and alternate current transducer with input for +/- 50A AC/DC, configurable by DIP switch, output from 0 a 10 Vdc, diameter of 12.3 mm, power supply 10 to 28 Vdc, Includes 1x A-DIN-T201 for DIN rail mounting

RTD (PT100, PT1000, PT500, Ni100) to DC current/voltage isolator converter. Fully configurable via dip switches or software through front micro-USB port. Features 3-way galvanic isolation (power / input / output). Requires a 10 to 40 Vdc or 19 to 28 Vac power supply to operate

Universal converter with 1 analog input (mA, V, RTD, TCs, Ohm), 1 strobe input, 1 anaog output mA/V and 1 digital contact available as ALARM or STROBE, settable by DIP switch or software with microUSB. Power supply 10 ~ 40 Vdc / 19 ~ 28 Vac

Thermocouple to DC isolator / converter. Converter Thermocouples TCs (J/K/ E/ N/ S/ R/ B/ T) and provides a mA/V standard output signal. It’s completely programmable via MicroUSB/App. Power supply: 10~40 Vdc / 19~28 Vac / 50-60 Hz

Converter / isolator with a current input (+/-20mA) or voltage (100mV ~ 20V) and a current output (0 ~ 20 mA / 4 ~ 20mA) or voltage (0 ~ 10V / 2 ~ 10V). 1.5 kVac galvanic isolation, DIN rail mounting. Power supply: 10 to 40 Vdc or 19 to 28 Vac

Universal analog signal duplicator and isolator module. 1 universal input configurable as voltage (0-10 V), current (0-20 mA), potentiometer (1 kΩ to 100 kΩ), thermocouple (J, K, R, S, T, B, E, N), or RTD (Pt100, Pt500, Pt1000, Ni100; 2, 3, or 4-wire). 2 independent outputs configurable as voltage (0-10 V) or current (0-20 mA active or passive) with 14-bit resolution. 4-way galvanic isolation at 1500 Vac. Configuration via DIP switches, software, or mobile app via Micro-USB port. DIN rail mounting. Power supply: 10 to 40 Vdc or 19 to 28 Vac (not included)